?

4.4. Identify Layers

P34 - 00:00?

Here is that once you get into a project and start working on all sorts of details, your layers panel might get messy.?

P34 - 00:06圖層面板可能凌亂。?

in case you're stuck with a chaotic project. Let me show you how you can identify key layers with some cool tricks.?

P34 - 00:12識別出關鍵圖層。?

We're going to start with this PSD.

00:15 Here. We can see the main folders are decently labeled.?

P34 - 00:18主要圖層標記好了。?

But as you open them, some don't make much sense. Plus, it's a hefty project. Here's my first tip to quickly identify a layer or a group.?

P34 - 00:27第一個方案識別出來。?

toggle its feasibility. You do that by clicking several times on its eye symbol to its left.?

P34 - 00:33通過點擊眼睛標簽。?

alternate between control one and control zero. Remember control one sets the view mode at 100%,?

P34 - 00:401控百分百放大。?

while CTRL zero fit the entire project on your screen.?

P34 - 00:440控預覽整個圖片。?

In this case, we're pretty zoomed out, but let's try it. Okay? ?

P34 - 00:49退出了。?

For reviewers galleries, things look pretty good.?

P34 - 00:53預覽圖標的種類，看起來很好。?

Let's go back to 100% and see some final details.?

P34 - 00:57回到100%看一些微調的細節。?

Inside the sub here group. We have three folds called 321.?

P34 - 01:01工作組下面123圖層。?

We can toggle all their visibility to identify them.?

P34 - 01:04開關眼睛來辨識。?

Or tip number two, you can move them on the canvas and observe what's going on.?

P34 - 01:11或第二個方案在畫布移動。?

here It seems one is the group on the left, and it contains this entire element.?

P34 - 01:15比如1為左側包含整個圖標。?

Once you've spotted it, use CTRL z to put it back Into Its place.?

P34 - 01:19Z控釋放回空間。?

It is a note about undo through CTRL z, starting with photoshop CC 2019. Each time you hit control z, you're going to go back a step,?

P34 - 01:2819版后的Z控一次退回一次。?

hit it two times on your undue two actions. ?

P34 - 01:31Z控2次，撤銷2次步驟。?

That is logical and easy to get. But if you have an older version, it doesn't matter. If it's from six months ago or six years ago, you have to do this.?

P34 - 01:39舊版的，不管6年前還是6月前。?

CTRL z to undo one action. Sure. But you need to use ALT CTRL z to go back several steps.?

P34 - 01:46Alt Z控再倒回去幾次。?

Just a friendly reminder. It’s not for you open the history panel from window history. I always have it docked here. And this shows me everything i've done so far.?

P34 - 01:56歷史版本展示了步驟。?

So if I want to go back 20 steps, it will be easier to use this panel rather than pressing CTRL z 20 times.?

P34 - 02:03歷史版完勝z控好多步驟。?

Okay? Back to our project.? Let’s open any of these folders and see what they contain.?

P34 - 02:08打開文件夾看看里面什么。?

We have several text layers and icon, but I'm not sure what this ellipse tool is.?

P34 - 02:13圖層徽標看看橢圓形。?

If I toggle its feasibility, I don't notice any particular change.?

P34 - 02:16開關眼睛可見性，沒見到變化。?

And that brings me to technique number three. When you can't spot a layer by toggling its visibility or moving it around, create a selection.?

P34 - 02:24可見性和移動，創建了選擇。?

Here's how this works. You hold CTRL and you click on its thumbnail once. you've just created a selection, we have an entire chapter dedicated to them.?

P34 - 02:36選中縮略圖，開始編輯。?

So don't worry about it.? What’s important is we get this interesting stroke around it.?

P34 - 02:38重點周邊有粗線包圍的。?

And now we can see this is a shape layer that has a very washed out color.?

P34 - 02:43圖層像水洗過的顏色。?

Let's see what else we can find in this project. Layer 22 from the Top of our panel is a great candidate. I'll try old tips, one tablets visibility.?

P34 - 02:53關閉眼睛看可見度，舊方案。 ?

I don't notice anything, but it's a very long project. Let me repeat the process one. I'm looking at it with the help of control zero.?

P34 - 03:01重復過程，0控協助觀察全局。?

Still nothing. Let me zoom back in and I will try to take number two. move it.?

P34 - 03:08方案二，放大，移動元素。?

Okay. I can see from my smart guides from these pink lines that show up that it's somewhere in the middle of my canvas, but I'm not sure where it is. ?

P34 - 03:17智能粉色法線提示中間，不確定。?

Tip three, create a selection. I'll hold CTRL and i'll click on its thumbnail.?

P34 - 03:23訣竅3控縮略圖。?

Ok. We have no error message. That means there is an active selection somewhere.?

P34 - 03:29沒有箭頭，沒有活躍選項。?

Looking at the project up and down, I can't seem to find it.?

P34 - 03:32上上下下找文件中，未找到。?

This is a difficult case. That's quite unlikely to happen in your first project.?

P34 - 03:37你第一項目未必碰到棘手的。?

But you never know what you'll come across by opening various PSDs from the web.?

P34 - 03:43接下來訣竅四。?

His tip number four, when nothing else works, use the marquee tool with your alignment tools. ?

P34 - 03:46大選框，做對齊框。?

Let me show you the technique, even though we haven't covered selections yet,?

P34 - 03:51縱然還沒有提到選項技術。?

i'll get the marquee tool through the hockey M.?

P34 - 03:53M字幕選取工具。?

It's the second tool from the left panel.?

P34 - 03:56左工具面板第二個。?

Now anywhere in plain sight, i'll draw out a small box. I'll switch to my move tool. And my alignment options are active.?

P34 - 04:04V移動選取框，對齊工具激活。?

Press one along vertical centers underline horizontal centers.?

P34 - 04:09垂直工具，選取框垂直中心。?

And this tricky layer will show up in the middle of my box.?

P34 - 04:13圖層展示在選框中間。?

And here it is. If we zoom in, we can see it's actually two tiny black dots. Let me undo a few times. So we can see where it was.?

P34 - 04:20重做再做反復看清楚。?

Okay. It was placed over this dark image, and that's why we couldn't see it.?

P34 - 04:26黑背景中圖層是難找到的原因。?

If I make a selection again, and I zoom in, we can see this effect, but at 100%, you may miss it.?

P34 - 04:31若不是100%放大看會漏掉。?

Tip number five is something I discourage using, but some people really enjoy it. One of the move tool. You can enable this setting from the options bar show transform controls.?

P34 - 04:44激活選項工具的變形控制。?

Now if I select any level whatsoever, it's going to look like I used CTRL T on it to transform it.?

P34 - 04:50T控轉化。?

Actually, if you go over any of these handles, you can recite it with any additional commands.?

P34 - 04:56轉化抓手，調節大小。?

Some photoshop users like this option, because it clearly shows you what level you're working on. ?

P34 - 05:00清晰顯示出與哪圖層合作。?

Personally. I think the control click technique solves half the problem.?

P34 - 05:05點擊已經解決一半問題了。?

And for the other half, you simply glance at the layers panel from time to time and you can see what there is highlighted.?

P34 - 05:12另一半圖層面板哪里高亮的。?

Let me show you another case. Let's switch tabs. And here we can see this project is considerably smaller.?

P34 - 05:17另一個項目看起來很小。?

It doesn't look that difficult. So why do we need so many ways to identify a layer anyway? ?

P34 - 05:21為什么用多種方式甄別圖層。?

Well, let's take it from the Top of this panel. Let's toggle all the visibility of layer eight.?

P34 - 05:28比如開關圖層八的可見度。?

Did you notice the change? If you're a regular hawkeye or a sniper, you'll have noticed this layer contained this leafs details.?

P34 - 05:34圖層包括樹葉的細節。?

So this visibility technique isn't great in this case.?

P34 - 05:39這種狀況開關眼睛不奏效。?

Let's try to tip number three, the selection method.As you can see, we get an error because these are very fine details, almost transparent.?

P34 - 05:47箭頭精調細節，透明的。?

And photoshop has a hard time finding them.?

P34 - 05:50ps很難找到。?

The same thing happens when we try to make a selection based on layer 10.?

P34 - 05:55圖層10上做個選擇。?

We get the same error. But if we try to tip number two, move it and then undo, we can see it's the shadow part here.?

P34 - 06:02可以選中后看到陰影。?

So I hope now you understand why it pays to know several ways to identify a layer.?

P34 - 06:07這就是圖層需要好幾種方式鑒別。?

You never know which one will better suit your circumstances. So that's why I strongly suggest you learn all of them.?

P34 - 06:13不曉得環境中哪個更適合。?

You have both PSD is attached. So please play around and go through all these steps by yourself.?

P34 - 06:17自己一步步的探索。?

Have fun!?

?

4.5. Filter Layers

P35 - 00:00?

Welcome to this lecture where we dive deep into filtering out layers.?

P35 - 00:04研究過濾圖層。?

Sometimes working in photoshop is all about making your life easier. That's exactly what this layer filter system is going to do for you. Let's use this PSD as an example, because it's pretty big.?

P35 - 00:15用大PSD做例子。?

We saw how we could identify straight layers here and there. And we talked about how each layer type has a distinctive symbol.?

P35 - 00:22每個圖層類型有可辨識大標志。?

If we focus our attention at the Top of our layers’ panel will be able to recognize them.?

P35 - 00:27圖層面板頂部可辨識出來。?

in order. Each icon represents raster layers, adjustment layers, text, shapes, smart objects.?

P35 - 00:35光柵 調節 文本 形狀 智能。?

If I click on the first one, this is going to show me all the raster layer from this project. Through this option, we can easily rename group or edit them in various ways.?

P35 - 00:44重命名和打組圖層。?

Once we're done, we have to press this icon again. So we can return to the normal viewing mode. ?

P35 - 00:50再點擊光柵，回到正常圖層。?

Let’s enable the shape filter layer. And i'll show you how I use it in real projects.?

P35 - 00:56圖形過濾圖層如何在項目中用。?

Here I have several base shape layers. If I select them and move them around on the canvas. I can identify them as being these white rectangles.?

P35 - 01:04選圖層對于畫布白矩形。?

Notice they have a shadow effect, but I'm not in love with it, so i'd rather get rid of it. ?

P35 - 01:09不喜歡陰影特效，去除。?

This is where these filters shine. Instead of going through potentially hundreds of mislabeled layers, this cuts my work down tremendously.?

P35 - 01:18錯誤命名圖層，降低工作效率。?

Now. I’ll right click and i'll choose clear layer style. Fantastic. ?

P35 - 01:22右鍵-清晰圖層樣式。?

Please note that once this filter is active, you can see this red button show up in the Top right.?

P35 - 01:28右上角紅色按鈕跳出來。?

This means you won't be able to select any other layer that doesn't currently fit this particular filter. ?

P35 - 01:34沒選擇不符合篩選方案的。?

Let me show you what I mean. Say I want to move all four white rectangles along with this headline.?

P35 - 01:41比如移動標題下面4矩形框。?

I'll hold CTRL and shift, and i'll click on it to select it as well.?

P35 - 01:44控獅+點擊=選中。 ?

As you can see, nothing happens. when I move them to the side. Only my rectangles get repositioned. And that's because this text layer didn't get selected.?

P35 - 01:53矩形框移動，文本不移動。?

If I perform the same action on this button, I immediately grab it from the canvas.?

P35 - 01:58可以從畫布選中圖層。?

And that's because other layer types can't be selected. While this filter is active.?

P35 - 02:03該篩選條件激活，其它不被選中。?

Let me drop the shift key and i'll just hold CTRL. So I can try to select just one text layer.?

P35 - 02:09控=文本圖層。?

As you see, I'm getting this error. If that happens to you, make sure your filter is not active.?

P35 - 02:15錯誤提醒，篩選請關閉。?

If you want to disable it temporarily, you can click on this red button. ?

P35 - 02:20暫停篩選，點右上角紅鈕。?

Now I can select this headline and move it up.?

P35 - 02:22可以選中標題，上移。?

Now i'll re enable this filter, and I can continue working on the project. Ok.?

P35 - 02:26右上角按鈕繼續進行。?

So far we've used its default setting filter by layer type,?

P35 - 02:32圖層形狀的默認篩選。?

or what photoshop calls it here, kind. One of the most useful ones from this drop down is name. This is why I'm constantly asking you to label your layers properly.?

P35 - 02:43用名字來篩選。?

I know all my white rectangles are called base, so i'll write that in.?

P35 - 02:46白矩形命名為基礎，鍵入索引詞。?

Now I can focus my attention only on them. This is fantastic for large projects, because if you stay consistent in your layer naming, you can perform mass actions quickly,?

P35 - 02:56如果名字一致，可以迅速的操作。?

even if you don't rename them. here’s what you can do??

P35 - 02:59縱然不重命名，這是你需要做的。?

all right rounded, which is added automatically for every rounded rectangle on the canvas.?

P35 - 03:05圓角矩形。?

Here I have several buttons, so i'll most likely get them here if I didn't rename them.?

P35 - 03:09若沒重命名，這樣開關。?

Of course, you may be wondering, how do you know which is which??

P35 - 03:14你怎么識別出來誰是誰的。?

Well, that's why we had a separate lecture on identifying layers. ?

P35 - 03:17識別圖層方案，單獨一課。?

In this case, i'll use CTRL zero, and i'll resort to technique number three, creating a selection by control clicking their thumbnails.?

P35 - 03:24控+縮略圖。?

And the first one in the layers’ panel is the last on my canvas.?

P35 - 03:29圖層面板第一個，畫布倒第一。?

As I moved down in this panel, I can see how each button lights up on the canvas.?

P35 - 03:33選中圖層，畫布上被圈選。?

But so you have no idea what your layers are called.All you remember is they had a stroke effect on them.?

P35 - 03:39圖層沒命名，有特效。?

Not a problem. from this drop down list will choose effect. And to the right, we have all the available layer styles in photoshop. Here. I'll choose stroke and hear all the layers that match my search.?

P35 - 03:51篩選-效果-筆畫。?

As you can imagine. This is a very powerful tool for any user, but there's one feature in particular that i love and that attribute,?

P35 - 04:01篩選條件 屬性。?

the name may not tell you a lot, but if we enable it, we'll see another filter show up. ?

P35 - 04:06屬性篩選列表。?

This list is huge, and through it you can select just about anything you'd like. For example, if you're in the habit of creating lots of layers, some of them may remain empty.?

P35 - 04:15喜歡多重圖層，有些名為空?qǐng)D層。?

Well, this filter has your back. enable it, and they'll show up.?

P35 - 04:19篩選條件展示特定圖層。?

This makes it very easy to clean up your PSD.?

P35 - 04:22讓PSD運用自如。?

If we click again, we'll also see not visible, which targets hidden layers. This is something you'll do a lot.?

P35 - 04:31隱藏圖層。?

You'll duplicate a layer for insurance purposes, just in case you screw up. But you do a good job and you carry on with the project without deleting that hidden layer.?

P35 - 04:39復制圖層隱藏，翻閱時易遺忘。?

Well, this filter comes to your aid, and it's huge. The last 1 I want to discuss is color. This doesn't refer to the colour of a layer per se. Instead, it looks at its label.?

P35 - 04:50標簽的顏色，非圖層顏色。?

Here I have a few that are red and some that are yellow. Through this filter, I can isolate them and focus my attention on them. And you get the idea. This filter system is fantastic.?

P35 - 05:00篩選紅色標簽。?

And what I showed you some of the most popular options from it. Next time you end up with a messy project. This is for you. And with that, we conclude this lecture. See you next time.?

?

4.6. EXERCISE Sort Layers

P36 - 00:00?

And it’s time to put our skills to the test with a new exercise. attached to this lecture. You have this PSD file that contains several layers that are unnamed.?

P36 - 00:13測試題是未命名的圖層。?

Please take the time to label them according to the final type to which they belong.?

P36 - 00:18最后類型來加入標簽。?

So when you recognize a layer, double click its name and change it to whatever format it is shaped layer, roster, etc. ?

P36 - 00:25命名光柵 形狀圖層。?

This means your layers panel will have layers called smart object one, smart object two and so on.?

P36 - 00:31智能項目一二等。?

After you rename them, place each type into its own folder.?

P36 - 00:35重命名后合并同類項打組。?

That means, for example, that all text layers should have their own folder.?

P36 - 00:39每個文本圖層有自己的文件夾。?

After you're done in the layers panel, it's time to move over to the canvas and visually separate them. ?

P36 - 00:45畫布上視覺化分開。 ?

I suggest you put them in columns, but any other method works just as well.?

P36 - 00:49建議放在一列。?

What's important is you practice your selections and try to increase your speed.?

P36 - 00:54訓練選擇，提速。?

This is all about dexterity and making smart choices.?

P36 - 00:57智能選擇。?

It's not a difficult exercise, but if you choose the wrong techniques, you may spend more time on it than is needed.?

P36 - 01:04殺雞焉用宰牛刀。?

the last task is to go through each layer type.?

P36 - 01:08瀏覽不同形狀圖層。?

And further segment them based on their color.?

P36 - 01:09基于顏色進一步分類。?

That means you should look at all shape layers and move the red ones into their own folder, then do the same for the green ones, and so on. ?

P36 - 01:18不同顏色進入不同標簽。?

The entire process should take no more than 10 minutes to complete.?

P36 - 01:20參考訓練時間10分鐘。?

This exercise will test your speed, your hockey knowledge, your ability to identify layers quickly.?

P36 - 01:26速度 熱鍵 鑒別圖層。?

But more importantly, you should take a moment and consider what's the best approach.?

P36 - 01:31考慮最好的適合自己的方式。?

that's essential. Like I said, photoshop is a versatile program. So in theory, you could move each layer onto the canvas by matching your arrow keys. ?

P36 - 01:39可以畫布移動圖層。?

As you can imagine, this would not be ideal. But that begs the question. What would be the ideal technique.?

P36 - 01:46若該技術不理想，理想的技術是什么。?

Find out that answer for yourself. And let me know in the comments section, if you are having a difficult time solving it, I'm going to help you out in the next lecture. But please make an effort and do it yourself. Have fun!?

?

4.7. Solution Sort Layers

P37 - 00:01?

Hi.How did you manage? I hope you've gone through this exercise by yourself. I know you've already used some of these techniques before, but guess what? The more you practice, the better you'll get. ?

P37 - 00:09越訓練越得心應手。?

My goal is to get you to a point where you no longer think about what needs to be done.?

P37 - 00:14下意識的做到，不假思索。?

Instead you straight up do it. No hesitation. So don't think my imagination isn't great. I'm purposely making you repeat some techniques. ?

P37 - 00:22有意讓你訓練一些技巧。?

I left you with a question. What would be the ideal way of solving it??

P37 - 00:26解決的理想方案是什么？?

Well, you can do it in several ways. Here. I'll show you my approach.?

P37 - 00:30給你我的方案。?

First. We can focus 90% of the time on the layers panel and rarely touch the canvas to solve the first couple of tasks.?

P37 - 00:37專注面板非畫布。?

That's because we can rely on the filter system to do all the heavy lifting for us. ?

P37 - 00:42用篩選工具。?

This is the easiest way of doing it. And I recommend you use this method on your first goal.?

P37 - 00:47這是第一個目標。?

The initial task is to rename them based on their type.?

P37 - 00:51基于類型重命名。?

Let's do that now, by starting with smart objects.?

P37 - 00:54智能項目篩選。?

The filter for that is the last icon.?

P37 - 00:56最后圖標是智能篩選。?

In case you forgot their symbols just hover over them. And here you are see, it says filter for smart objects. ?

P37 - 01:03鼠標停留在圖標會彈出解釋。?

With this active, we immediately see all the layers that meet that criteria.?

P37 - 01:08所有圖層滿足篩選條件。?

Now we can get to work. We can double click the first one, and we'll call it smart object space. Now we're going to copy that title. So we can then easily pasted on all the other ones.?

P37 - 01:19重命名一個，復制到其它同類。?

Of course, we need to put in that one for our first smart object.? But as you can see, now we can use CTRL v to paste. And all we have to do is put a number at the end of it.?

P37 - 01:30同名用末尾數字來區分。?

There are nine smart objects, by the way, just in case you were wondering, this is a good way of practicing your keyboard skills. ?

P37 - 01:35訓練鍵盤的好方法。?

I hope you look like one of those highly skilled piano players that have been practicing since they were three years old.?

P37 - 01:41像是練習3年的鋼琴一樣。?

That would bring me the most joy. There are nine layers of each type smart objects which we covered, shape layers, text layers, and finally rasterize layers,?

P37 - 01:52光柵 形狀 文本 智能圖層。?

all of them can be identified and sorted by using the same method. ?

P37 - 01:56同樣合并同類，重命名方法。?

You rely on photoshop filter to do all the work. It most cases, you'll have to look at their thumbnails and recognize them by their symbols.?

P37 - 02:03縮略圖識別標志。?

But here I want to show you the fastest way. Okay? I've sorted all the layer types, and now we can continue.?

P37 - 02:10識別完所有的圖層類型，可繼續。?

The next task is very easy as well. If we use the same filter, all we have to do is select the first one, then you shift and click on the other end. ?

P37 - 02:20shift頭尾選中一段圖層。?

This is how we get them all. Now press CTRL G to group them. Repeat the process by filtering them one by one.?

P37 - 02:28篩選后打組。?

The less effective but more rewarding method is to use CTRL and shift and select each layer as you find it In the layers panel. ?

P37 - 02:35時空shiftC圖層面板選擇。?

I didn't want to be cruel, so I didn't include 200 layers.?

P37 - 02:38并沒有200圖層那樣繁多。?

But in general, you should try on a sort of techniques to make sure you fully understand each hot key.?

P37 - 02:44充分理解某個熱鍵。?

It's easy to use the auto select feature, but this might cause you to work with only one hand.?

P37 - 02:50一手選擇功能。?

by this. I mean, the easiest way is not always the best way for a beginner or intermediate user. ?

P37 - 02:54最簡單方案對中級水平不友好。?

So from time to time, try the harder way so that you can test yourself.?

P37 - 03:00測試最難的方法，訓練自己。?

OK. Once you're done, you can close the filter by pressing the small red button. And now you have to rename each folder,?

P37 - 03:07關閉紅鈕關閉篩選，命名文件夾。?

open each group and see what type of layer it contains. ?

P37 - 03:09文件夾展開看看包含文件是啥。?

Label it accordingly, and move to the next one. Not a problem, since there's only a few layer types in photoshop.?

P37 - 03:16下一步。?

Now we need to separate all these layers on the canvas.?

P37 - 03:18分離畫布上所有圖層。?

for their layers types means for columns. The basic way of doing it is to select them one by one with the control click technique and move them into a column format.?

P37 - 03:28點擊技術移動到縱列格式。?

This is time consuming. So it's not optimal. But for learning purposes, it's just fine. ?

P37 - 03:31學習過程必要部分。?

The easiest way of doing it is to use the alignment tools from up Top.?

P37 - 03:37最簡單方式排列組合是工具按鈕。?

So I can select all the layers inside a group and left align them. ?

P37 - 03:40所有圖層，左側排列。?

Looking good. Now I can place them anywhere on my canvas. And I can also distribute their vertical centers.?

P37 - 03:50散落畫布的，垂直居中。?

So I get more space between them. This needs to be repeated for all the other layer types.?

P37 - 03:54給所有圖層類型重復操作。?

This is another underused technique, mostly because a lot of photoshop users don't know about these tools.?

P37 - 04:00未充分開發的工具。?

I love them because they are efficient, and they provide pixel perfect accuracy. ?

P37 - 04:04精準高效的排列像素。?

As you can see, these tasks are not hard to pull off, but I can promise you a lot of students are going to skip over these exercises.?

P37 - 04:12很多學生選擇避開訓練。?

I know you can understand everything that's going on by lounging back on your couch and watching this on a big screen TV. But believe me, it's one thing to watch and it's another to work. ?

P37 - 04:21看和動手做兩碼事。?

OK. So we've renamed them, we've grouped them, and we're also separated them on the canvas.?

P37 - 04:29重命名，打組。畫布上分離。?

Now it's time to sort them again based on their color. For this step, it's important. We have our background layer completely locked.?

P37 - 04:36背景圖鎖定，顏色分類。?

Make sure you have this lock icon next to it. And not any other symbol.?

P37 - 04:40鎖定后出現的標志。?

If not selected. And click on this small icon. Okay? You'll notice some of these shapes are very small. This is just one of them.?

P37 - 04:49有些圖形非常小。?

to easily select them will have to either zoom in really close and use the control click technique, or better yet click and drag.?

P37 - 04:58放大 點擊 拖動。?

We've done this before, but in case you didn't get it on the first go, let me explain it again.?

P37 - 05:01多解釋才能領會。?

with the background locked while on the move tool, I can drag and get it with ease.?

P37 - 05:07控，移動工具。?

Everything that's inside this rectangle will be selected.?

P37 - 05:12矩形框內的被選中了。?

Of course, we don't want any extra layers. So we use the following approach.?

P37 - 05:15不需要額外圖層，用下面的方案。?

After we select one, we'll hold down CTRL and shift so we can get another one.?

P37 - 05:20時空+矩形框選。?

This requires dexterity. But once you get it, you'll be flying.?

P37 - 05:26難點理解到，得心應手。?

So again, with your eyes on the layers panel. Once you select the first layer, you need to hold both the CTRL and shift keys. So you can click and drag to select another one,?

P37 - 05:34時空+選擇，同時選擇另一個。?

then use the same controlled G hockey to group them. It's up to you. If you want to rename them now, or at the end,?

P37 - 05:43G控?zé)徭I打組。重命名。?

it would be a bit better to do it now, because you can see the colors. But for the sake of your flow, you can continue with this click drag technique until you finish up.?

P37 - 05:50點擊 拖拽 直到完成。?

This is going to take time, but that's how you increase your skills.?

P37 - 05:55花費時間提高技術。?

Let me zoom through these steps since it's not going to do you much good. If you see the same action repeated 20 times. Ok. ?

P37 - 06:00步驟看20遍不如自己重復操作。?

So that's the essence of this exercise. Like I said, if you don't choose the proper techniques, it's one of the most difficult ones because of the amount of manual labor involved.?

P37 - 06:11若是沒選對工具，會走彎路。?

But remember we initially sorted them with the filters from the Top of the layers panel.?

P37 - 06:15從圖層面板篩選出來的。?

Now I strongly encourage you to take them one by one from the canvas with the control click technique, if you will. This way, you can separate them by their type and put them into columns at the same time.?

P37 - 06:27通過形狀分離，同時排成列。?

So there is an advantage in working like that.?

P37 - 06:29一舉兩得。?

That means you have to repeat this exercise by doing it the hard way. to do that and you will see the benefits later down the road.?

P37 - 06:36邊做邊體驗好處。?

In the end, this is what your project should look like. Please try and do it at least one more time the other way.