系統應用程序支持使用數據集1、2或數據集

10…33.數據集10…25用于AC 800M和ABB之間的數據交換

通過CI858的驅動器和I/O單元。

通過將參數98.02 COMM MODULE設置為FBA來激活數據集10…25

DSET10.每個數據集在驅動器中都有指定的讀寫任務間隔

程序可以使用參數Groups 90…93來選擇數據集的內容。

作用

激活A(yù)C 800M、CI858、ABB驅動器和I/O單元之間的通信

系統必須配置有效的參數：

?使用Control Builder工程工具配置CI858系統。

?通過設置ABB Drive數據集參數來定義系統數據集

工程驅動器的示例參數組90…93。參見適當?shù)腁BB

數據集和其他所需參數設置的驅動器固件手冊。

Control Builder硬件編輯器包含以下選項卡：

設置選項卡：在設置選項卡下，可以定義參數。

連接選項卡：在連接選項卡下，將變量連接到

硬件通道。

狀態選項卡：在狀態選項卡下，您可以看到每個的當前值和狀態

頻道

單元狀態選項卡：在單元狀態選項卡下，您可以看到當前和鎖定

機組狀態。

The System Application Program supports the use of datasets 1, 2 or datasets

10...33. Datasets 10...25 are used for data exchange between the AC 800M, ABB

Drives and I/O units via the CI858.

Datasets 10...25 are activated by setting parameter 98.02 COMM MODULE to FBA

DSET10. Every dataset has a specified read and write task interval in the drive

program. The contents of datasets can be selected using parameter Groups 90...93.

ction

To activate communication between AC 800M, CI858, ABB Drives and I/O units

the system must be configured with valid parameters:

? Configure the CI858 system with the Control Builder engineering tool.

? Define the system datasets by setting the ABB Drive dataset parameters, for

example parameter groups 90...93 for Engineered Drives. See appropriate ABB

Drive Firmware Manual for dataset and other required parameter settings.

The Control Builder hardware editor contains the following tabs:

Settings Tab: Under the Settings tab you define the parameters.

Connections Tab: Under the Connections tab you connect the variables to the

hardware channels.

Status Tab: Under the Status tab you can see the current value and status of each

channel.

Unit Status Tab: Under the Unit Status tab you can see the current and latched

status of the unit.